Tripp Lite B050-000 Owner's Manual page 71

Preferred host name:
Preferred host name to request from DHCP server. Whether the DHCP server takes the B050-000's suggestion into
account or not depends on the server configuration.
IP address:
IP address in the usual dot notation.
Subnet Mask:
The net mask of the local network.
Gateway IP address:
In case the B050-000 should be accessible from networks other than the local one, this IP address must be set to
the local network router 's IP address.
Primary DNS Server IP Address:
IP address of the primary Domain Name Server in dot notation. This option may be left empty, however the
B050-000 will not be able to perform name resolution.
Secondary DNS Server IP Address:
IP address of the secondary Domain Name Server in dot notation. It will be used in case the Primary DNS Server
cannot be contacted.
Miscellaneous Network Settings
Remote Console And HTTPS port:
Port number at which the B050-000's Remote Console server and HTTPS server are listening. If left empty the
default value will be used.
HTTP port:
Port number at which the B050-000's HTTP server is listening. If left empty the default value will be used.
Telnet port:
Port number at which the B050-000's Telnet server is listening. If left empty the default value will be used.
SSH port:
Port number at which the B050-000's Secure Shell (SSH) server is listening. If left empty the default value will
be used.
Bandwidth Limit:
The maximum network traffic generated through the B050-000 Ethernet device. Value in Kbit/s.
Enable Telnet access:
Set this option to allow accessing the B050-000 using the Telnet gateway (see the Section called Telnet Console).
6. Menu Options
71