Remote Power - Tripp Lite B050-000 Owner's Manual

Remote Power

Intelligent Platform Management Interface (IPMI)
The B050-000 is capable of controlling the power status of an IPMI-enabled host system. See the Section called
"Intelligent Platform Management Interface (IPMI)" for configuration instructions.
If the B050-000 is configured to act as an IPMI client the Remote Power Control page will show three buttons:
Power On:
Sends an IPMI "Power On" command to the Baseboard Management Controller (BMC).
Power Off:
Sends an IPMI "Power Off" command to the BMC.
Reset:
Sends an IPMI "Hard Reset" command to the BMC.
6. Menu Options
Figure 6-2. B050-000 Power Buttons
45