Warning: The initial IP configuration is usually done directly at the host system using the special procedure
described in Table 4-1.
Warning: Changing the network settings of the B050-000 might result in losing connection to it. If you change
the settings remotely, make sure that all the values are correct and you still have an option to access the
B050-000.
Basic Network Settings
IP auto configuration
With this option you can define if the B050-000 should fetch its network settings from a DHCP or BOOTP server.
For DHCP select "dhcp" and for BOOTP select "bootp". If you choose "none" then IP auto configuration
is disabled.
6. Menu Options
Figure 6-25. Video Settings
70