Configuration; Initial Configuration; B050-000 Setup Tool; Main Window - Tripp Lite B050-000 Owner's Manual

Initial Configuration

The B050-000's communication interfaces are all based on TCP/IP. It comes preconfigured with the IP configuration listed
in Table 4-1.
Warning: If the DHCP connection fails on boot up, the B050-000 will not have an IP address.
If this initial configuration does not meet your requirements, the following describes the initial IP configuration that is
necessary to access the B050-000 for the first time.

B050-000 Setup Tool

The setup tool is used to determine the IP address assigned to the B050-000 by the DHCP server or to change the device's
initial network configuration.

Main Window

4. Configuration

Parameter
IP auto configuration
IP address
Netmask
Gateway
IP access control
Table 4-1. Initial Network Configuration
Figure 4-1. B050-000 Setup Tool (Windows Version)
Value
DHCP
—
255.255.255.0
none
none
18