Error Code Messages - PAT DS 50 Troubleshooting Manual

DS50 TROUBLE SHOOTING MANUAL

11. ERROR CODE MESSAGES

Error Code Table (DS50)
for Cranes FMTV-C, FMTV-W, LVS
System program:
Error Code Error
O Overload
P Pre-warning
E0 1 No loadchart radius or
angle available with
high boom angle.
E0 2 No loadchart radius or
angle available with low
boom angle.
TSM DS 50-003/REV.B/031-300-190-003/12-02-96
DS50 V1.4C Parts list No. .: 71 050 14 0005
Cause
Cutoff due to overload.
Approaching an overload
condition.
Boom is elevated too high
into a non rated radius or
angle range.
Boom is lowered too low into
a non rated radius or angle
range.
Remedy
Reduce load moment.
Slow crane operation and be
alert.
Boom down the boom to a
radius or angle specified in
the load chart.
Raise the boom to a radius
or angle specified in the load
chart.
41
LEVEL 3