PAT DS 50 Troubleshooting Manual page 29

DS50 TROUBLE SHOOTING MANUAL
7. ADJUSTING EMPTY HOOK LOAD DISPLAY
Enter your calculated correction in +/- LB.
Example: +500 = increases the hook display by 500LB.
- 275 =decreases the hook display by 275 LB.
The correction value is limited to +/- 500.
Then press the >CR< key to enter the value.
Press the key >K< to return to the start up menu.
Go to section 3.2 and observe the hook display while you
repeat booming down from high to low boom angle.
TSM DS 50-003/REV.B/031-300-190-003/12-02-96
continuation
Is the
problem corrected
now?
YES
The End
NO
Return to section 5 and identify the problem.
29
LEVEL 3