PAT DS 50 Troubleshooting Manual page 31

DS50 TROUBLE SHOOTING MANUAL
8. ADJUSTING RADIUS DISPLAY UNDER LOAD
Adjust the correction factor to increase or decrease the radius.
Then press the >CR< key to enter the value.
Press the key >K< to return to the start up menu.
Go to section 3.2 and repeat testing the radius under load.
TSM DS 50-003/REV.B/031-300-190-003/12-02-96
continuation
Is the
problem corrected
now?
YES
The End
NO
Return to section 5 and identify the problem.
31
LEVEL 3