Identify The Problem - PAT DS 50 Troubleshooting Manual

DS50 TROUBLE SHOOTING MANUAL

5. IDENTIFY THE PROBLEM

Overload cut off for
the actual length step
too early or too late.
Go to
section 6.
TSM DS 50-003/REV.B/031-300-190-003/12-02-96
Connect the
hand terminal and press
the >H< key to compare the displayed
values with the actual values. Identify the problem.
Find a square matching your problem
and follow the instructions.
Empty hook display
for the actual length
step too low or too high.
Go to
section 7.
Radius display under
load for the actual
length step too high
or too low.
Go to
section 8.
25
LEVEL 3
Load display for the
actual length step and
angle too high or too low.
Go to
section 9.