A Regulatory Compliance Notices; Regulatory Compliance Identification Numbers; Federal Communications Commission Notice - Compaq StorageWorks Reference Manual

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your
product has been assigned a unique Compaq series number. The series number can be
found on the product nameplate label, along with all required approval markings and
information. When requesting compliance information for this product, always refer
to this series number. The series number should not be confused with the marketing
name or model number of the product.

Federal Communications Commission Notice

Part 15 of the Federal Communications Commission (FCC) Rules and Regulations
has established Radio Frequency (RF) emission limits to provide an interference-free
radio frequency spectrum. Many electronic devices, including computers, generate RF
energy incidental to their intended function and are, therefore, covered by these rules.
These rules place computers and related peripheral devices into two classes, A and B,
depending upon their intended installation. Class A devices are those that may
reasonably be expected to be installed in a business or commercial environment. Class
B devices are those that may reasonably be expected to be installed in a residential
environment (for example, personal computers). The FCC requires devices in both
classes to bear a label indicating the interference potential of the device as well as
additional operating instructions for the user.
The rating label on the device shows the classification (A or B) of the equipment.
Class B devices have an FCC logo or FCC ID on the label. Class A devices do not
have an FCC logo or FCC ID on the label. After the Class of the device is determined,
refer to the corresponding statement in the following sections.
StorageWorks by Compaq 3U Rackmount Enclosure Reference Guide
Regulatory Compliance Notices
A
A–1