Compaq StorageWorks Reference Manual page 21

Rack Installation
To install the enclosure into a rack:
• Always start at the bottom of the rack, or at the top of a previously mounted
component, and work up.
• Always make sure that the rack-mounting rails are level from front to back.
• Have a pencil available before you begin.
1. Attach the template to the front of the rack.
2. Mark the holes for the front tabs of the spring-loaded rack rails, and mark the top
and bottom edges of the template for successive installation.
Figure 3–1: Measuring with the template
3. Repeat steps 1 and 2 on the back of the rack.
3–2 StorageWorks by Compaq 3U Rackmount Enclosure Reference Guide