Teaching In; Teaching Directly In To Homematic Devices; Control Unit - HomeMatic HM-RC-Key4-3 Operating Manual

Start-up
If the battery is too weak for the device to continue
being used, the 5 brief red flashes take place directly
after the button is pressed. In this case, you will have
to replace the battery with a new one.

6.2 Teaching in

Please read this entire section before starting
the teach-in procedure!
To integrate the wireless remote control into your
Homematic system and enable it to communicate with
other Homematic devices, you must teach it in first.
You can teach the wireless remote control directly in to
other Homematic devices or to the Homematic central

control unit.

6.2.1 Teaching directly in to Homematic devices

If you would like to teach the wireless remote control in
to one or more Homematic devices, you must put the
devices to be linked into teach-in mode and select the
required teach-in channel.
Teaching in the universal wireless remote con-
trol involves teaching in buttons 1 and 2 as well
as 3 and 4 as pairs of buttons (BP 1 and BP 2).
48