HomeMatic HM-RC-Key4-3 Operating Manual page 49

This means that when you press button 2 and
button 1, this automatically teaches in the func-
tions „On" and „Off" respectively. The same ap-
plies to buttons 4 and 3.
Teaching in alarm control unit and KeyMatic
wireless remote controls involves teaching in
buttons 1 and 2 as a button pair (BP 1). But-
tons 3 and 4 are taught in individually, one after
the other.
To do this, proceed as follows:
• The teach-in button is located on the rear of the
wireless remote control. Press the teach-in button
briefly using a pointed object.
Start-up
49