HomeMatic HM-RC-Key4-3 Operating Manual page 53

• Within this teach-in time, you can also switch the
Homematic wireless remote control to configura-
tion mode by pressing its teach-in button briefly
using a pointed object.
• The wireless remote control will now be in confi-
guration mode. The device LED will flash green to
indicate this.
• After a short time, the newly taught-in device will
appear in the inbox of your software interface. The
button „Inbox (x new devices)" indicates how many
new devices have been taught in successfully.
• If required, you can teach in additional devices
by repeating the steps described above for each
device.
• Now configure the newly taught-in devices in the
inbox as described in the next section („Configuri-
ng newly taught-in devices").
Start-up
53