Table of Contents
Advertisement
4.2 Dividers
4.3 Tube holder
4.4 Ampoule Strips
The case can be divided internally as required using
the dividers. An example is shown on the folding
page.
When fitting the dividers, please ensure that:
•
they are positioned correctly as in figure
•
they are fitted perpendicularly into opposing
grooves
•
the spring fittings are properly engaged
To remove a divider, press the two circular spring
fittings inwards and lift the divider upwards.
When the case is supplied, the tube holders are fixed
to the "base, medium" divider
can be moved to another divider in the base of the
case by loosening the fixings and relocating the
holder as required.
The position of the ampoule strips on the ampoule
tray can be changed by loosening the fixings and re-
locating the ampoule strips as desived. Further strips,
e.g. WM 15140
29
fixed on the tray as desired.
. The tube holder
18
available as accessories, can be
Use EN
9
Advertisement
Table of Contents
