Easy Setup - Danfoss Micromon Manual

Easy Setup

Language
Clock
Site Name
Number Points Used
Application
Alarm Parameters
Micromon
To select a language, using the '
box to the required language, then press the '↵ ↵ ↵ ↵ ↵ ' key to continue.
To modify the clock settings, using the '
required field, then the '
'↵ ↵ ↵ ↵ ↵ ' key to enter setting and the '
To enter a site name, use the '
' and ' ' keys to select the required characters. Press the '
to the next screen.
Use this screen to select the required number of points to be used. Use the '
and ' ' keys to increment up or down to the required number.
This screen is used select the application of those points that have just been
selected in the previous screen. Use the '
the required point, then the '
required application. Press the '
screen.
This screen is for setting the alarm parameters for the three different applications.
These are "global" settings, e.g. the high, low and delay values entered for
'Frozen' will apply to all points that have been set as 'Frozen' in the previous
Application setting screen.
Use the '↵ ↵ ↵ ↵ ↵ ' key to select each field and the
Press the '
This screen is displayed giving a summary of all the points that have just been
set. Press the '↵ ↵ ↵ ↵ ↵ ' key to finally accept the setting or press the '
RS.8A.Y3.02
Micromon
', ' ', '
' and ' ' keys to modify the time and date, press the
' key to continue to the next screen.
' and '
' and ' ' keys to move the 'tick' symbol to the
' key to accept and continue to the next
' key to accept and continue to the next screen.
© Danfoss 01-2003
' or ' ' keys move the selection
'and ' ' keys move the cursor to the
' keys to move the cursor, then the '
' key to continue
' and ' ' keys to move the cursor to
' or ' ' key to adjust each setting.
' key to go
'
7