Assembling the remaining thread monitor (2-needle machines)
Fig. 15: Assembling the remaining thread monitor (2)
(1) - Hose
(2) - Hose
(3) - Cable RFW sensor left
(4) - Hose
(6) - Cable RFW sensor right
5. Connect the hose (4) to the elbow screw joint (8).
6. Feed cable RFW sensor left (3), cable RFW sensor right (6) and hoses
7. Feed cable RFW sensor right (6) with sensor block and hose (1) to
8. Feed cable RFW sensor left (3) with sensor block and hose (2) through
9. Feed cable RFW sensor left (3) with sensor block and hose (2) to
Additional Instructions M-TYPE DELTA - 00.0 - 08/2019
⑦
⑧
④
③
②
⑨
(1) and (2) through the cable duct (7) and clip (10).
the right hook.
the clip (9).
the left hook.
⑥
①
(7) - Cable duct
(8) - Elbow screw joint
(9) - Clip
(10) - Clip
④
⑩
19