Assembling The Remaining Thread Monitor - DURKOPP ADLER M-TYPE DELTA Additional Instructions

3.2 Assembling the remaining thread monitor

Fig. 14: Assembling the remaining thread monitor (1)
(1) - Hose
(2) - Hose
(3) - Cable RFW sensor left
To assemble the remaining thread monitor:
1. Shorten the hose (1) to a length of approx. 130 mm.
2. Shorten the hose (4) to a length of approx. 400 mm.
3. Connect hose (4) and hose (5) to one another using the plug nipple.
4. Connect hose (1) and hose (2) to hose (5) using a Y-piece.
18
Assembling the remaining thread monitor (2-needle machines)
②
③ ④
①
⑤ ⑥
(4) - Hose
(5) - Hose
(6) - Cable RFW sensor right
Additional Instructions M-TYPE DELTA - 00.0 - 08/2019
⑥
③