DURKOPP ADLER M-TYPE DELTA Additional Instructions page 11

Assembling the remaining thread monitor (1-needle machines)
Fig. 3: Assembling solenoid valve and RFW PCB (2)
⑥
⑦
(6) - Spacer
(7) - Jumper
(8) - PCB
6. Assemble the PCB (8) to the holder (9) using 4 spacers (6).
7. Insert the cable (10) at slot X1 on the PCB (8).
8. Insert the cable (11) at slot X3 on the PCB (8).
9. Slip 2 jumpers (7) onto the outer pins at slot X4.
Additional Instructions M-TYPE DELTA - 00.0 - 08/2019
⑦ ⑧
(9) - Holder
(10) - Cable RFW sensor
(11) - Cable
⑪
⑩
⑨
9