Contents and general instructions
Designated use
Festo P.BE-VIFB21-03-EN en 0010a
The valve terminal described in this documentation is de-
signed for use only as follows:
–
for controlling pneumatic and electric actuators
(valves and output modules)
–
for interrogating electric sensor signals through
the input modules.
Please use the valve terminal only as follows:
–
as designated
–
in faultless technical condition
–
without undertaking any modifications.
If the valve terminal is used in conjunction with additional
commercially-available components, such as sensors and
actuators, make sure that the maximum specified limits for
pressures, temperatures, electrical data, torques, etc. are
observed.
Please observe the standards mentioned in the relevant
chapters and comply with national and local technical regula-
tions.
VII