Figure C-6. Receive External Clk Smb And Drive To The Backplane Unterminated - National Instruments VXI-1394 Getting Started

Appendix C Advanced Hardware Configuration Settings
VXI-1394 Interface for Windows NT/98
In Figures C-6 and C-7, switch S6 uses the alternate configuration to
generate the VXIbus CLK10 signal. Instead of the onboard oscillator, the
VXI-1394 generates from the external CLK SMB connector and drives to
the backplane. You can choose whether to terminate the signal using S2.
Polarity remains irrelevant to these configurations.

Figure C-6. Receive External CLK SMB and Drive to the Backplane Unterminated

TERMINATE
Y N
S2
OUT IN
S3
NON INV
S4
SMB
TRIG TERM
S5
Y N
S6
SMB ONBRD
CLK10 SOURCE
C-8
EXT
CLK10
www.ni.com