Opening Periods Setting - Verify Or Delete Values; Audit; Download The Audit On A Dallas Key - M-LOCKS Basic line Series User Manual

Press . LCD will display the message:
Press . LCD will display the message:
Enter first opening time and date and then closing time and date. Press
If a value for the year is set, this opening period will cease after that date. If a value for the year
is not set, this opening period will repeat every year.
To cancel entered values, press
Repeat this procedure for every opening period.
During opening periods it will be possible to open the safe's door even if time lock is active.
Up to 30 opening periods are available for a maximum of fourteen (14) days each.

Opening periods setting - Verify or delete values

Access the time lock menu and access the function. LCD will display
the message:
Press and then
Press , LCD will display the first saved opening period.
Press to scroll all the set values.
Press to delete the set values. LCD will display the message:
Press to delete the LCD values or press
At the end of list press

Audit

Download the audit on a Dallas key

Use this function to download all keypad and lock events on a Dallas key.
Page 14 M-LOCKS BV - Vlijtstraat 40 - NL-7005 BN Doetinchem - T +31 (0)314 376 876
sales@m-locks.com - www.m-locks.com
.
, LCD will display the message:
.
to exit.
ADD NEW VALUES
" DD/MM/YY hh:mm
! DD/MM/YY hh:mm
to confirm.
OPENING PERIODS
SETTING
VERIFY OR DELETE
VALUES
" DD/MM/YY hh:mm
! DD/MM/YY hh:mm
DELETE?
v
END OF LIST
IU_MiniTech_03