Closing Periods Setting - Verify Or Delete Values; Opening Periods Setting- Add New Values - M-LOCKS Basic line Series User Manual

Access the time lock menu and access the function. LCD will display
the message:
Press , LCD will display the message:
Press , LCD will display the message:
Enter first closing time and date and then opening time and date. Press
If a value for the year is set, this closing period will cease after that date. If a value for the year
is not set, the closing period will repeat every year.
To cancel entered values, press
Repeat this procedure for every closing period.
During closing periods the safe's door can not be opened.
Up to 30 opening periods are available for a maximum of fourteen (14) days each.
Closing periods setting – Verify or delete values
Access the time lock menu and access the function. LCD will display
the message:
Press and then
Press , LCD will display the first saved closing period.
Press to scroll all the set values.
Press to delete the set values. LCD will display the message:
Press to delete the LCD values or press
At the end of list press

Opening periods setting- Add new values

Access the time lock menu and access the function. LCD will display
the message:
M-LOCKS BV - Vlijtstraat 40 - NL-7005 BN Doetinchem - T +31 (0)314 376 876
IU_MiniTech_03
sales@m-locks.com - www.m-locks.com
.
, LCD will display the message:
.
to exit.
CLOSING PERIODS
SETTING
ADD NEW VALUES
! DD/MM/YY hh:mm
" DD/MM/YY hh:mm
to confirm.
CLOSING PERIODS
SETTING
VERIFY OR
DELETE VALUES
! DD/MM/YY hh:mm
" DD/MM/YY hh:mm
DELETE?
v
END OF LIST
OPENING PERIODS
SETTING
Page 13