Dynamic Codes - M-LOCKS Basic line Series User Manual

Press to confirm or press
to confirm.

Dynamic codes

Use this function to enable/disable dynamic codes function on the lock. Dynamic codes function
can be only enabled when lock is open. Open the lock before enable the function.
Access the Master menu and access the function. LCD will display the
message:
Press . LCD will display the message:
Press . LCD will display the message:
Press to confirm. LCD will display the message:
M-LOCKS BV - Vlijtstraat 40 - NL-7005 BN Doetinchem - T +31 (0)314 376 876
Page 16
sales@m-locks.com - www.m-locks.com
to disable/enable/delete and press
DYNAMIC CODES
STATUS:
DISABLED (ENABLED)
STATUS:
ENABLE? (DISABLE?)
OPERATION DONE
IU_MiniTech_03