Adding A New Code/User; Setting The Time Delay And Opening Window Time - M-LOCKS EM1620 User Manual

6

ADDING A NEW CODE/USER

1
Press and hold '1' until a double signal sounds. The LED will illuminate when performing the
following actions:
9 8 7 6
• Enter your personal Manager Code
For example!
9 9 9 9
• Enter the new User Code
9 9 9 9
• Enter the new User Code again
If an incorrect code is entered on the second occasion, a long signal sounds and the old code remains
valid.
7 DELETE SECOND USER
3
Press and hold '3' until a double signal sounds. The LED will illuminate when performing the following
actions:
9 8 7 6
• Enter your personal Manager Code
The user has been deleted.
8

SETTING THE TIME DELAY AND OPENING WINDOW TIME

Time delay:
Open window time:
Changing or deleting the time delay values can only be done in open window time.
www.m-locks.com
5 4
9 9
9 9
5 4
The time between the first and second code entry in minutes.
The period of time in minutes during which the code can be entered a second
time and the lock can be opened.
Basic line
V02 EN
7