When a valid code has been entered, the lock electronics remove the blocking for 3 seconds and the bolt can be moved into the housing by turning an internal driving cam with a turning entry unit or a knob. After moving the bolt into LOCKED position, the Straightbolt automatically secures. www.m-locks.com...
Page 4
The lock has to be fitted exclusively on steel secure storage. The mounting base also must be made of steel. Installation on other materials only after consultation M-LOCKS or VdS . It is recommended to prevent access to unauthorized persons to safety-relevant parts of the high- security lock when the safe is open.
Page 5
(To remove the connector(s), lift it up and carefully pull it out.) To tie the cable, push it into the cable channel in the lock cover. In the entry unit or battery/alarmbox, connect a 9V ALKALINE Duracell, Industrial or Energizer battery. www.m-locks.com...