Open The Lock; Manager (01) And Users (02-49): Open The Lock With Time Delay; Override Users (50-59): Open The Lock Without Time Delay - M-LOCKS Basic line Series User Manual

Open the lock

Manager (01) and users (02-49): open the lock with time delay

Power up the keypad. LCD will display the message:
Enter Manager or user code and the Dallas key (if set). LCD will show
time delay counting.
If the entered code is wrong LCD will display the message:
To stop time delay counting press
After time delay counting LCD will display open window counting:
Press , LCD will display the message:
Enter Manager or user code and the Dallas key (if set). Open within
three seconds (green led).
If the user is set to open in dual mode LCD will display the message:
Enter second code and the Dallas key (if set). Open the lock within
three seconds (green led).

Override users (50-59): open the lock without time delay

Power up the keypad. LCD will display the message:
Enter override user code and the Dallas key (if set). Open the lock
within three seconds (green led).
If the user is set to open in dual mode LCD will display the message:
Enter second code and the Dallas key (if set). Open the lock within
three seconds (green led).
M-LOCKS BV - Vlijtstraat 40 - NL-7005 BN Doetinchem - T +31 (0)314 376 876
IU_MiniTech_03
sales@m-locks.com - www.m-locks.com
and then to confirm.
ENTER CODE
X X – X X X X X X
TIME DELAY
00:59
WRONG CODE
STOP TIME DELAY
COUNTING?
OPEN WINDOW
00:01
ENTER CODE
X X – X X X X X X
OPEN THE LOCK
ENTER 2° CODE
X X – X X X X X X
OPEN THE LOCK
ENTER CODE
X X – X X X X X X
OPEN THE LOCK
ENTER 2° CODE
X X – X X X X X X
OPEN THE LOCK
Page 5