Mitsubishi OUTLANDER Owner's Manual page 77

Fasten the pulled up cover to the seatback
with the band (A).
3. Pull the belt (B) located in the centre of the
seatback and raise the seatback.
4. Pull the belt (C- black) to release the lock.
5. Tilt the whole of the third seat to the rear.
NOTE
l If the third seat is locked to the floor after tilt-
ing the whole of the third seat to the rear,
pull the belt (C-black) again to release the
lock.
Seats and seat belts
6. Raise the head restraints.
7. Lift up the whole of the third seat from the
floor and fasten it to the front.
NOTE
l Push up the third seat to the front to make
sure it is securely locked in place.
2
2-11