Mitsubishi OUTLANDER Owner's Manual page 312

For pleasant driving
l ®
The Bluetooth 2.0 interface supports num-
bers (0 to 9) and characters (+, # and *).
l
The maximum supported telephone number
length is as follows:
• International telephone number: + and tel-
ephone numbers (to 18 digits).
• Except for international telephone num-
ber: telephone numbers (to 19 digits).
Making a call using a phone book
You can make calls using the vehicle phone book
or mobile phone book of the Bluetooth
face.
For details on the phone books, refer to "Phone
book function" on page 5-73.
1. Press the SPEECH button.
2. Say "Call."
NOTE
l If you say "Call" when the vehicle phone
book and the mobile phone book are empty,
the voice guide will say "The vehicle phone
5
book is empty. Would you like to add a new
entry now?"
Answer "Yes," and the voice guide will say
"Entering the phone book - new entry
menu." You can now create data in the vehi-
cle phone book.
Answer "No," to return to the main menu.
3. After the voice guide says "Name please,"
say the name you want to call, from those reg-
istered in the phone book.
4. If there is only one match, the system pro-
ceeds to Step 5.
If there are two or more matches, the voice
guide will say "More than one match was
found, would you like to call <returned
5-72
name>." If that person is the one you want to
call, answer "Yes."
Answer "No," and the name of the next match-
ing person will be uttered by the voice guide.
NOTE
l If you say "No" to all names read by the sys-
tem, the voice guide will say "Name not
found, returning to main menu" and the sys-
tem will return to the main menu.
®
2.0 inter-
5. If only one telephone number is registered un-
der the name you just said, the voice guide
proceeds to Step 6.
If two or more telephone numbers are regis-
tered that match the name you just said, the
voice guide will say "Would you like to call
<name> at [home], [work], [mobile], or [oth-
er]?" Select the location to call.
NOTE
l If the name you selected has matching data
in the vehicle phone book but no telephone
number is registered under the selected loca-
tion, the voice guide will say "{home/work/
mobile/other} not found for <name>.
Would you like to add location or try again?"
Say "Try again," and the system will return
to Step 3.
Say "Add location" and you can register an
additional telephone number under the selec-
ted location.
l If the name you selected has matching data
in the mobile phone book but no telephone
number is registered under the selected loca-
tion, the voice guide will say "{home/work/
mobile/other} not found for <name>.
Would you like to try again?"
Answer "Yes," and the system will return to
Step 3.
Answer "No," and the call will be cancelled.
Start over again from Step 1.
6. The voice guide will say "Calling <name>
<location>" and then the system will dial the
telephone number.
NOTE
l
When the confirmation function is on, the sys-
tem will ask if the name and location of the
receiver are correct.
If the name is correct, answer "Yes."
If you want to change the name or location to
call, answer "No." The system will return to
Step 3.
Redialing
You can redial the last number called, based on the
history of dialed calls in the paired cellular phone.
Use the following procedure to redial.
1. Press the SPEECH button.
2. Say "Redial."
SEND function
During a call, press the SPEECH button to enter
voice recognition mode, then say "<numbers>
SEND" to generate DTMF tones.
E00761300035