Mitsubishi OUTLANDER Owner's Manual page 396

Maintenance
Map & room lamps (front)
1. Insert a minus screwdriver with the end cov-
ered with a cloth or other object to prise out
the lens.
NOTE
l When replacing the bulb, put the map &
8
room lamp (front) switch in the OFF position.
8-34
2. While holding down the tab (A), pull out the
bulb.
E01005000087
3. To install the bulb, perform the removal
steps in reverse.
NOTE
l When installing the lens, align the hooks (B)
to the holes in the vehicle body.
Room lamp (rear)/luggage room lamp
1. Insert a minus screwdriver with the end cov-
ered with a cloth or other object into the cut
out area of the lens to wedge out the lens.
NOTE
l When replacing the bulb, put the room lamp
(rear)/luggage area lamp switch in the "OFF"
position.
2. While holding down the tab (A), pull out the
bulb.
E01005300442