Mitsubishi OUTLANDER Owner's Manual page 292

Hide thumbs Also See for OUTLANDER:
Table of Contents

Advertisement

For pleasant driving
2. The display changes as follows every time
the DISP button (4) is pressed briefly:
Album title → Title name → Artist name →
Genre → Normal display
Example
Album title
Title name
Artist name
NOTE
l
Press and hold the DISP button (4) again un-
til you hear a beep, and the tag information
disappears.
5
l
Up to 10 characters are shown in the display
at once. If the title is cut off in the middle,
press the PAGE button (3). The next charac-
ters are displayed every time this button is
pressed.
l
If no title is stored, "NO TITLE" is shown in
the display.
l
Characters that cannot be displayed are sub-
stituted by "•".
5-52
To use the external audio input
function*
Auxiliary Audio connector (RCA)
Auxiliary Video connector (RCA)
Auxiliary Audio connector (RCA)
A- Left audio input connector (white)
B- Right audio input connector (red)
Auxiliary Video connector (RCA)
A- Left audio input connector (white)
B- Right audio input connector (red)
C- Video input connector (yellow)
You can listen to commercially available audio
equipment, such as a portable audio system, from
your vehicle's speakers, by connecting the audio
equipment to the audio input connectors, which are
external input connectors (pin jacks).
NOTE
l
For information on using the Auxiliary Vid-
eo connector (RCA), refer to the separate own-
er's manual for the rear-seat display or the
MITSUBISHI Multi-Communication Sys-
tem.
To activate the external audio input
mode
E00732200553
1. Use a commercially available audio cable to
connect the audio equipment to the internal
audio input connector.
2. [Vehicles with a premium sound system]
Press the CD button (D) for more than 2 sec-
onds.
The display (E) will show "AUX" and then
external audio input mode will be activated.
[Vehicles with a rear-seat display]
Press the CD button (D) for more than 2 sec-
onds.
The display (E) will show "AUX REAR"
and then the external audio input mode will
be activated.
When the power of the rear-seat display is
on, press the SOURCE button of the rear-
seat display to activate VIDEO mode. (For de-
tails, refer to the separate rear-seat display
owner's manual.)
3. To deactivate the external audio input mode,
press the AM/FM button (F) or the CD but-
ton (D) to switch to another mode.

Advertisement

Table of Contents
loading

Table of Contents