Other interrupt displays (when the ignition switch is "ON")
The operation status of each system is displayed on the information screen. Refer to the appropriate page for the system for further details.
Screen type 1
Screen type 2
This informs you that a periodic inspection is due.
System operation status
l
When "2WD" mode is selected with the drive
mode selector
l
When "4WD AUTO" mode is selected with the
drive mode selector
l
When "4WD LOCK" mode is selected with the
drive mode selector
l
When the Active Stability Control (ASC) is op-
erating
l
When the reversing sensor system detects an ob-
struction
Instruments and controls
Reference
Refer to "Electronically controlled 4WD system" on
page 4-46.
Refer to "Active stability control (ASC)" on page
4-58.
Refer to "Reversing sensor system" on page 4-65.
E00524200611
3
3-35