Mitsubishi OUTLANDER Owner's Manual page 41

Hide thumbs Also See for OUTLANDER:
Table of Contents

Advertisement

All of the keys provided with your new vehicle
have been programmed into the vehicle's electron-
ics. Refer to "Keyless operation system: Ignition
switch" on pages 1-12 and 1-19.
NOTE
l
If you lose one of the keyless operation keys,
contact a MITSUBISHI MOTORS Author-
ized Service Point as soon as possible.
To obtain a replacement or extra spare key,
take your vehicle and all remaining keys to
your MITSUBISHI MOTORS Authorized
Service Point. All the keys have to be re-reg-
istered in the immobilizer computer unit.
The immobilizer can register up to 4 differ-
ent keys.
Ignition switch
To prevent vehicle theft, only the emergency key
with the preregistered keyless operation key inser-
ted can start the engine. (Electronic immobilizer
function)
Also refer to "Starting and driving: Starting the en-
gine" on pages 4-15 and 4-15.
LOCK
The engine is stopped and the steering wheel
locked. The emergency key can be inserted and re-
moved in this position.
ACC
The engine is stopped, but the audio system and oth-
er electrical devices can be operated.
ON
The engine is running, and all the vehicle's electri-
cal devices can be operated.
START
The starter motor operates. After the engine has star-
ted, release the emergency key and it will automati-
cally return to the "ON" position.
NOTE
l
The keyless operation key is equipped with
E00307400430
an electronic immobilizer. To start the en-
gine, the ID code which the transponder in-
side the key sends must match the one regis-
tered in the immobilizer computer.
Refer to "Electronic immobilizer (Anti-theft
starting system)" on page 1-18.
When turning from "LOCK" to "ACC"
1. Take the emergency key out of the keyless op-
eration key. Refer to "Emergency key" on
page 1-18.
Locking and unlocking
2. Remove the ignition switch cover while press-
ing the lock release button (A).
3. Insert the emergency key into the ignition
switch, and turn while pushing.
NOTE
l
If the ignition switch will not turn from the
"LOCK" to the "ACC" position, lightly turn
the steering wheel right and left while turn-
ing the ignition switch.
1
1-19

Advertisement

Table of Contents
loading

Table of Contents