Mitsubishi OUTLANDER Owner's Manual page 127

Manual reset mode
l When the average fuel consumption and aver-
age speed are being displayed, if you hold
down the multi-information meter switch,
the average fuel consumption and average
speed displayed at that time are reset.
l When the ignition switch is switched from
"ACC" or "LOCK" to "ON", the mode set-
ting is automatically switched from manual
to auto.
Although the mode setting is automatically
switched to the auto reset mode, if you
switch the mode setting to the manual reset
mode, the average fuel consumption and aver-
age speed from the last time the display is re-
set will be displayed.
Auto reset mode
l When the average fuel consumption and aver-
age speed are being displayed, if you hold
down the multi-information meter switch,
the average fuel consumption and average
speed displayed at that time are reset.
l If the ignition switch is at "ACC" or
"LOCK" for about 4 hours or longer, the aver-
age fuel consumption display and average
speed display are automatically reset.
NOTE
l
The average fuel consumption display and
average speed display can be reset individual-
ly for the auto reset mode and manual reset
mode.
l The memory of the auto reset mode or man-
ual reset mode for the average fuel consump-
tion display and average speed display is
erased if the battery is disconnected.
l The initial (default) setting is "Auto reset
mode".
Changing the fuel consumption display unit
The display unit for fuel consumption can be switch-
ed. The distance, speed, and amount units are also
switched to match the selected fuel consumption
unit.
1. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
from the setting mode screen to the menu
screen.
Refer to "Changing the function settings
(when the ignition switch is "ON")" on page
3-17.
2. Lightly press the multi-information meter
switch to select "AVG UNIT (fuel consump-
tion display setting)".
Type 1
Type 2
3. Press and hold the multi-information meter
switch for about 2 seconds or more to dis-
play "AVG UNIT" (fuel consumption dis-
play unit setting).
4. Lightly press the multi-information meter
E00523000449
switch to switch in sequence from km/L →
L/100 km → mpg (US) → mpg (UK) → RE-
TURN → km/L.
Type 1
5. Press and hold the multi-information meter
switch for about 2 seconds or more to change
the setting to the selected unit.
NOTE
l The display units for the driving range, the
average fuel consumption, the average speed
and the momentary fuel consumption are
switched, but the units for the indicating nee-
dle (speedometer), the odometer and the trip-
meter will remain unchanged.
l The memory of the unit setting is erased if
the battery is disconnected, and it returns au-
tomatically to L/100 km.
Instruments and controls
Type 2
3
3-19