Mitsubishi OUTLANDER Owner's Manual page 321

3. Connect the Dock connector (C) to the iPod
(B).
NOTE
l
Use a genuine Dock connector from Apple
Inc.
4. Connect the Dock connector (C) to the USB
input terminal (D).
CAUTION
l Keep the lid of the floor console box
closed while driving the vehicle. A lid or
the contents of the floor console box
could otherwise cause injuries.
NOTE
l When closing the floor console box, be care-
ful not to trap the connector cable.
5. To remove the Dock connector, turn the igni-
tion switch to the "LOCK" position first and
perform the installation steps in reverse.
Types of connectable devices and sup-
ported file specifications
Device types
Devices of the following types can be connected.
Model name
USB memory device
*
iPod touch
*
iPod classic
iPod (fifth generation)
iPod nano (fifth genera-
*
tion)
iPod nano (second gen-
*
eration)
Models other than USB
memory devices and
iPods
*
: "iPod touch," "iPod classic," "iPod" and "iPod
nano" are registered trademarks of Apple Inc. in
E00762200015
the United States and other countries.
E00762300218
NOTE
l Depending on the type of the USB memory
device or other device connected, the connec-
ted device may not function properly or the
available functions may be limited.
l Use the iPod whose firmware has been upda-
ted to the latest version.
l You can charge your iPod by connecting it to
the USB input terminal when the ignition
switch is in the "ACC" or "ON" position.
l Do not keep your USB memory device or
iPod in your vehicle.
l It is recommended that you back up files in
case of data damage.
For pleasant driving
Condition
Storage capacity of 256
Mbytes or more
F/W Ver.1.1.1 or later
F/W Ver.1.0 or later
* F/W Ver.1.2.2 or later
F/W Ver.1.2 or later
F/W Ver.1.1.2 or later
Digital audio player sup-
porting mass storage
class
5
5-81