Table of Contents
Advertisement
Available languages
Available languages
EN
Using the
Blood Pressure Monitor
Batteries and Power Cable Instructions
Batteries
Unwrap and insert the 4 included 1.5V AAA batteries into
the monitor.
Note: To replace batteries, see page 25.
Micro USB Power Cable
You may also use the monitor with the 5V micro USB power
cable. Only use an approved micro USB power cable to
avoid damaging the monitor.
1.
Make sure the power cable is not damaged.
2.
Plug the cable into the power socket on the right side of
the blood pressure monitor.
3.
Plug the USB into a 5V powered USB port.
18
Note:
•
No battery power is consumed while the micro USB
power cable is plugged in.
•
If electrical power is interrupted (such as by
accidentally unplugging the monitor from the power
socket), the monitor must be reset by removing the
power cable from the power socket on the monitor and
reinserting it.
When to Take Blood Pressure
•
The best times to take your blood pressure are within 1
hour of waking in the morning or 1 hour before bedtime.
•
When measuring in the morning, measure after
urinating and before eating breakfast.
•
Always measure your blood pressure before taking
blood pressure medication.
•
If you need to measure your blood pressure at another
time of day, make sure you are calm and stable before
measuring.
•
Measure your blood pressure at the same time every
day. Blood pressure changes during the course of the
day, as much as 20–40 mmHg.
Hide quick links:
Advertisement
Table of Contents
