Table of Contents
Advertisement
Using the Blood Pressure
Monitor
Attaching the Cuff
1.
Rest in a comfortable position for at least 5
minutes before measuring to ensure the best
results.
2.
Plug the air plug into the air port. Make sure
the air plug is completely inserted to avoid air
leaking.
Note: Your upper arm should be bare or wearing
only thin material.
3.
Place the cuff on your upper left arm with the
air hose on the inside of your arm. The band
should not be wrapped too tightly (leave space
to insert about 2 fingers), and the lower edge
of the cuff should be about 0.8–1.2 in / 2–3 cm
away from your elbow.
[Figure 2.1]
30
0.8–1.2 in / 2–3 cm
Figure 2.1
4.
Select a user (see page 23).
5.
Place your arms on a surface and sit with your
feet flat on the floor so that the cuff is at the
same level as your heart. Your arms should be
in a relaxed, natural position.
[Figure 2.2]
Using the Blood Pressure Monitor (Cont.)
Figure 2.2
Note:
• Avoid flexing arm muscles or trying to
support yourself on your arm, as this can
increase blood pressure. Use a cushion for
support if necessary.
• For patients with hypertension, the middle
of the cuff should be at the level of the right
atrium of the heart.
31
Hide quick links:
Advertisement
Table of Contents
