Related Manuals for ETEKCITY EBP-UA5
Summary of Contents for ETEKCITY EBP-UA5
- Page 1 Upper-Arm Blood Pressure Monitor Model: EBP-UA5 User Manual Questions or Concerns? support@etekcity.com • (855) 686-3835...
-
Page 2: Table Of Contents
Table of Contents Package Contents Package Contents 1 x Blood Pressure Monitor Specifications 1 x Arm Cuff Safety Information 1 x Type-C USB Charging Cable Function Diagram 1 x Storage Bag Display Diagram 1 x User Manual Getting to Know Your Blood Pressure Monitor 1 x Quick Start Guide Information on Blood Pressure •... -
Page 3: Specifications
Specifications Pressure: 0–290 mmHg / 0–39 kPa Measurement Range Pulse: 40–199 per minute Pressure: ±3 mmHg / ±0.4 kPa Accuracy Pulse: ±5% Units mmHg / kPa Monitor: 4.9 x 4.5 x 2.8 in / 12.6 x 11.5 x 7.1 cm Dimensions Cuff Circumference: 8.7–16.5 in / 22–42 cm Weight... -
Page 4: Safety Information
READ AND SAVE THESE INSTRUCTIONS Safety Information Please read and follow all instructions and safety guidelines in this manual. • This monitor is intended for adult use in CAUTION homes only. Consult your doctor before using this monitor on older children. Contraindication: Using this monitor on patients undergoing dialysis therapy or on •... - Page 5 Safety Information (cont.) equipment, MRI machines, CT scanners, flammable anesthetic mixtures such as nitrous oxide (laughing gas), or in an oxygen- arteriosclerosis), diabetes, poor perfusion, rich environment. pregnancy, pre-eclampsia, or renal diseases. • Closely supervise children near the monitor. • Consult your physician before using on: Do not allow children to use or play with this neonatal (newborn) patients, pregnant...
- Page 6 Safety Information (cont.) • Too frequent and consecutive measurements could cause disturbances in blood circulation and injuries. Caution: Indicates a potentially hazardous situation which, if not avoided, may result • Do not use the monitor for any purpose in minor or moderate injury to the user or other than measuring blood pressure.
- Page 7 Safety Information (cont.) • Do not wash the cuff in a washing machine or dishwasher. • Do not hit or drop the monitor. • Do not make any repairs yourself. If you have any questions, contact Customer Support • Do not use the monitor in a moving vehicle, (see page 34).
-
Page 8: Function Diagram
Function Diagram Display Air Port Type-C Charging Port Set/User Button Start/Stop Button Memory Button Air Plug Air Hose Type-C USB Charging Cable Cuff... -
Page 9: Display Diagram
Display Diagram Battery User Systolic Blood Pressure Diastolic Blood Pressure Irregular Heartbeat Indicator Pulse Cuff Status Blood Pressure Level Indicators... -
Page 10: Getting To Know Your Blood Pressure Monitor
Getting to Know Your Information on Blood Blood Pressure Monitor Pressure Blood pressure monitors use the oscillometric Your blood pressure level is determined in the method of measuring blood pressure. The monitor circulatory center of your brain and adjusts to a can detect the blood’s movement through the variety of situations through feedback from the brachial artery and convert it into a digital reading. - Page 11 Information on Blood Pressure (cont.) Diastolic blood pressure (mmHg) Severe hypertension Moderate hypertension Mild hypertension High normal value Normal blood pressure Optimal blood Systolic blood pressure pressure (mmHg) (target value) 130 140 160 180...
- Page 12 There are 6 blood pressure levels that can be displayed on the monitor. These represent 6 blood pressure values as classified by the World Health Organization (WHO). Blood Pressure Value Blood Pressure Level Indicator WHO Classification DIA <80 & SYS <120 Optimal blood pressure DIA <85 &...
- Page 13 Blood pressure is very high if your diastolic pressure Caution: Never use the results of your is above 90 mmHg and/or your systolic blood measurements to independently alter the drug doses pressure is over 160 mmHg, while at rest. In this case, prescribed by your physician.
-
Page 14: More Information On Blood Pressure
More Information on Blood Pressure Selecting a User Values To switch between user 1 and 2: • Increased blood pressure values (various • With the monitor off, press to show the forms of hypertension) are associated with current user and press again to change users. The considerable health risks over time. -
Page 15: Memory
Memory Turning the Speaker On/Off Results are automatically saved after each To view saved results: measurement. The monitor can save up to 90 results While the monitor is off, press and hold for each user. until the display reads “SP OFF” or “SP ON”. “SP OFF”... -
Page 16: Changing Units
Before Measurement Changing Units To change between mmHg and kPa: • If the monitor is being used by multiple people, While the monitor is off, press and hold wash hands before each measurement. until the display reads “SP OFF” or “SP ON”. •... - Page 17 Before Measurement (cont.) in height between your heart and the cuff results in a measurement error of 10 mmHg. • Remove any clothing that fits closely to your • Only use the included cuff. upper arm. • A loose or improperly fitted cuff will result in •...
-
Page 18: Using The Blood Pressure Monitor
Using the Blood Pressure Select a user (see page 14). Monitor Place your arms on a surface so the cuff is at the same level as your heart. Your arms should be in a relaxed, natural position. Note: Before first use, fully charge the blood pressure monitor (see Charging the Battery, Press to begin measuring. - Page 19 Using the Blood Pressure Monitor (cont.) Note: • Press at any time to stop measuring. • If the cuff causes any increased discomfort, immediately press to turn off the monitor. • Wait at least 3 minutes before measuring again. • After taking a measurement and showing the reading, the monitor will turn off after 1 minute of inactivity.
-
Page 20: Display Readings
Display Readings Symbol Solution Air may be leaking or pulse may be too weak. Reattach the cuff and remeasure. Blood pressure cannot be detected due to interference. Make sure you are seated and positioned correctly before testing again. The measurement result is not correct. Remeasure. Inflation has failed. -
Page 21: Maintenance
Maintenance Note: • Charging may take 3–4 hours. Charging the Battery • Every 2 months (or when battery life is significantly shorter), optimize battery The blood pressure monitor comes with a performance. rechargeable Li-ion battery inside. Use the included • Battery life depends on the frequency Type-C USB cable to charge the monitor. -
Page 22: Optimizing Battery Performance
Optimizing Battery Performance Storage For best results allow the monitor to go through 2 full • Turn the monitor off and unplug the air plug from charge and use cycles. the air port. • Place the cuff and the machine in the storage bag. Fully charge the battery. -
Page 23: Frequently Asked Questions
Frequently Asked Questions Why are the blood pressure readings different every time I measure? • Your blood pressure will vary throughout the Why are my blood pressure readings different? day, even if it is measured every 10 seconds. • The area you are in as well as your mental and It will fluctuate for a variety of reasons. -
Page 24: Glossary Of Symbols
Glossary of Symbols Electrical devices are recyclable material Storage humidity range: and should not be disposed of with Lower limit: 15%RH household waste after their useful life. Upper limit: 93%RH Help us protect the environment and save resources by taking this device to the appropriate collection point. - Page 25 Electromagnetic Compatibility This ME EQUIPMENT or ME SYSTEM is suitable for (e.g. shielded cable, load impedance) or specifically home healthcare environments and so on. (e.g. by MANUFACTURER and EQUIPMENT OR TYPE REFERENCE). Warning: Don’t near active HF surgical equipment and If any: the performance of the ME EQUIPMENT the RF shielded room of an ME system for magnetic or ME SYSTEM that was determined to be...
- Page 26 Table 1 Guidance and Manufacturer’s Declaration – Electromagnetic Emission Emissions Test Compliance RF emissions Group 1 CISPR 11 RF emissions Class B CISPR 11 Harmonic emissions IEC 61000-3-2 Voltage fluctuations/ flicker emissions IEC 61000-3-3...
- Page 27 Table 2 Guidance and Manufacturer’s Declaration – Electromagnetic Immunity Immunity Test IEC 60601-1-2 Test level Compliance Level Electrostatic ±8 kV contact ±8 kV contact discharge (ESD) ±2 kV, ±4kV, ±8 kV, ±15 kV air ±2 kV, ±4kV, ±8 kV, ±15 kV air IEC 61000-4-2 Electrical fast Power supply lines: ±2 kV...
- Page 28 Table 2 (cont.) Guidance and Manufacturer’s Declaration – Electromagnetic Immunity Immunity Test IEC 60601-1-2 Test level Compliance Level Power frequency 30 A/m 30 A/m magnetic field 50Hz/60Hz 50Hz/60Hz IEC 61000-4-8 150KHz to 80MHz: 3Vrms Conduced RF 6Vrms (in ISM and IEC61000-4-6 amateur radio bands) 80% Am at 1kHz...
- Page 29 Table 3 Guidance and Manufacturer’s Declaration – Electromagnetic Immunity Test IMMUNITY Band Modulation Distance Frequency Service Modulation TEST LEVEL (MHz) (MHz) (V/m) Pulse 380- TETRA 400 modulation 18 Hz Radiated RF ± IEC610004-3 380- GMRS 460, 5 kHz (Test specifications FRS 460 deviation for ENCLOSURE...
- Page 30 Table 3 (cont.) Guidance and Manufacturer’s Declaration – Electromagnetic Immunity Test IMMUNITY Band Modulation Distance Frequency Service Modulation TEST LEVEL (MHz) (MHz) (V/m) 1720 GSM 1800; CDMA 1900; Pulse 1845 1700– GSM 1900; modulation 1990 DECT; 217 Hz Radiated RF LTE Band 1, 3, 1970 IEC610004-3...
- Page 31 FCC Statement FCC Radiation Exposure Statement This device complies with Part 15 of the FCC Rules. Operation is This equipment complies with FCC radiation exposure limits set forth subject to the following two conditions: for an uncontrolled environment. End users must follow the specific 1.
-
Page 32: Warranty Information
• To damages or defects exceeding the cost of the product. Etekcity warrants this product to the original purchaser to be free from defects in material and workmanship, under normal Etekcity will not be liable for indirect, incidental, or use and conditions, for a period of 1 year from the date of consequential damages in connection with the use of the original purchase. - Page 33 Etekcity’s warranty extends only to products purchased from authorized sellers that are subject Register your product within 14 days of purchase at to Etekcity’s quality controls and have agreed to follow its www.etekcity.com/warranty to extend your 1-year warranty quality controls.
-
Page 34: Customer Support
Customer Support If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Distributed by Etekcity Corporation Support Hours 1202 N. Miller St., Suite A Anaheim, CA 92806 Monday—Friday 9:00 am —5:00 pm PST/PDT Email: support@etekcity.com... - Page 35 Notes...
- Page 36 Connect with us @Etekcity JJ011821AL-M1_0121EBP-UA5...