ETEKCITY B22 User Manual page 32

EN
The device is intended for use in the electromagnetic environment specified below. The customer or the user of device should assure that it is
Immunity Test
Electrostatic discharge
(ESD)
IEC 61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
Surge
IEC 61000-4-5
32
Guidance and manufacture's declaration – electromagnetic immunity
used in such an environment.
IEC 60601 Test Level
±8 kV contact
±2 kV, ±4 kV, ±8 kV,
±15 kV air
± 2 kV for power supply lines
± 1 kV for input/output lines
± 1 kV line(s) to line(s)
± 2 kV line(s) to earth
Compliance Level
±8 kV contact Floors should be wood, concrete, or ceramic
tile. If floors are covered with synthetic
±2 kV, ±4 kV, ±8 kV, material, the relative humidity should be at
±15 kV air least 30%.
Mains power quality should be that of a typical
Not applicable
commercial or hospital environment.
Mains power quality should be that of a typical
Not applicable
commercial or hospital environment.
Electromagnetic Environment -
Guidance