Blood Pressure Measurement Instructions - ETEKCITY B22 User Manual

EN
!
• Do not measure blood pressure for at least 30
minutes after physical activity. Do not smoke or
drink stimulating beverages, such as coffee or
alcohol, before measuring.
• Blood pressure should be measured at intervals
of no less than 3 minutes, depending on your
physical condition.
• People with arrhythmia and/or arteriosclerosis
should be measured by medical staff for a
professional diagnosis.
• Avoid pressing the cuff to your body when taking
measurements.

Blood Pressure Measurement Instructions

Measure your arm circumference using a measuring tape
1.
in the middle of your relaxed upper arm.
2. Plug the air plug on the cuff into the air port on the
monitor. Make sure the air plug is completely inserted to
avoid air leaking, but avoid forcing the plug into the port.
Note: Make sure the cuff is not placed in the power
socket. The air port is on the left side of the monitor
(see page 10).
20
CAUTION
3. Wrap the cuff around your upper left arm with the air
cable on the inside of your arm. The rubber tube should
be on the inside of your arm extending downward to
your hand. The lower edge of the cuff should be placed
about 2–3 cm / 0.8–1.2 in above the elbow.
The on the edge of the cuff must lie over the artery
which runs down the inner side of the arm.
4. Secure the cuff by wrapping it around your arm and
pressing the hook-and-loop fastener together. The band
should not be wrapped too tightly (leave space to insert
about 2 fingers).
5. Select a user (see page 16). Make sure the air hose
is not kinked.
6. Rest in a comfortable area for at least 5 minutes before
measuring to ensure the best results.
Figure 1.2
[Figure 1.2]
0.8–1.2 in / 2–3 cm