Check The Included Items - Roland MODELA MDX-15 User Manual

2 Check the Included Items

AC adapter: 1
Spindle unit: 1 (*1)
Tool: 1 (High speed steel) The shape of
the tool may differ from that below.
Hexagonal wrench (size : 3 mm) :1
Hexagonal wrench (size : 1.5 mm): 1
Clay: 1
(*1) Do not discard the included-item box containing the spindle unit and sensor unit. It is needed to hold the unused unit while Modela
is in operation.
(*2) The positioning pin is used when performing double-sided cutting with MODELA. For detailed information about double-sided cutting,
see "Cutting Tips" in the included CD-ROM (refer to "8 Overview of the Usage Guides").
Power cord: 1
Sensor unit: 1 (*1)
Set screw M3 x 3: 2 (One spare)
Positioning pins: 3 (*2) (diameter 3
mm (0.118 in.), length 20 mm (0.787
in.)) (One spare)
MDX-20/15 User's Manual: 1
Roland software package: 1
Cap screw M4 x 15: 4 (Two spares)
The configuration
o f t h e M DX- 1 5
differs, but the at-
tachment method
is the same.
Front cover: 1
Double sided tape: 1
2 Check the Included Items 7