Setting Up The Program - Roland MODELA MDX-15 User Manual

Setting Up the Program

If you are installing under Windows NT 4.0/2000/XP, log on to Windows as "Administrators" account.

Switch on the computer and start Windows.

Place the CD from the Roland Software Package in the CD-ROM drive.
The Setup menu appears automatically.




12 5 Installing the Software
Click the drop-down arrow next to [Click here], choose the
model you're using, then click [Install].
If you're using the MDX-20, choose [MDX-20]. If you're using the
MDX-15, choose [MDX-15].
To view the description of a program, click the
the manual, click the button.
(There are manuals in PDF format for the programs that the
references. Acrobat Reader is required to view PDF files.)
If there are programs you don't want to install, then clear their check
boxes before you click [Install].
The Setup program starts. Follow the messages to carry
out setup and finish setting up the program.
* When the setup for one program finishes, the setup for the next
program starts.
In the interval until the next setup starts, a dialog box showing the
progress of processing is displayed.
The driver settings appear.
Check the values, click [Close], and finish installing the
driver.
When all installation finishes, the screen shown below appears.
Click [Close].
button. To view
button