Dr.picza - Roland MODELA MDX-15 User Manual

Dr.PICZA

For information on how to use Dr. PICZA, see "7 Operation Guide [Scanning Section]. "
This section describes the controls for Dr. PICZA.
56 9 Software Guide
This displays a prediction of how
much time cutting will take. The
time is a general estimate.
In addition to the time, you can
also verify the tool movement
distance and movement range.
This displays the simulation
screen as a flat (two-dimension-
al) view.
This displays the simulation
screen as a solid (three-dimen-
sional) view.
These change the perspective
when displaying a simulation
three-dimensionally.
This is for checking the shape
after cutting simulation.
This unhides and hides the
controller window. At the con-
troller window, you can make
the settings for the various
scanning parameters.
These choose how an object
moves when dragged.
This displays the top surface
of an object.
These zoom the view of an
object in or out.
This displays the object, filling
the view area.
These choose how an object
is drawn.
These adjust the slant of an
object.
This saves data in various file
formats.
This enlarges or reduces what
is displayed to fill the drawing
size.
This selects how the object
is displayed when on the 3D
screen when not performing
any operation.
This selects the image to paste
on the surface of the work-
piece.
This changes the direction and
brightness of incident light,
thereby changing the shading.
This displays the movement of
the tool with animation.
These display the coordinates
of the point chosen with the
mouse pointer.
Clicking a start point and
an end point shows you the
distance between the two
points.
This undoes the very last op-
eration.
These color a surface of the
object.
These specify the edit area for
three-dimensional data.
This specifies the range to
rescan.
These edit three-dimensional
data.
This deletes data in the se-
lected range.
This starts MODELA Player.