Step 5: Setting Scanning Conditions And Starting Scanning - Roland MODELA MDX-15 User Manual

Step 5: Setting Scanning Conditions and Starting Scanning

About scanning conditions and the scanning area
Y SCAN PITCH
(Spacing of adjacent scan points along the Y axis)
Scanning area
X SCAN PITCH
(Spacing of adjacent scan
points along the X axis)
CAUTION
During cutting or scanning, keep hands away from the cut-
ting tool and the probe.
Doing so may result in injury.
Start Dr. PICZA and make the settings for scanning resolution, the lower limit for the height of the surface to scan, and the
scanning quality.

Click on the Dr. PICZA.
The Controller window opens. When Dr. PICZA is started, the Controller window is already open.


: Scan path
(bidirectional scanning)
: Scan points
* If you have made a clay base, the height of the
clay is taken to be the Z-axis reference surface.
Make the settings for X scan pitch and Y scan pitch.
Make the setting for Z bottom.
If you have made a clay base, the height of the clay is taken to be
the Z-axis reference surface.
Workpiece
Scanning Area
plate
Scan object
Cray
Workpiece
Z BOTTOM
plate
(Height of the scanning
area's bottom plane)
7 Operation Guide [Scanning Section]
Z Upper
Limit
41