Modela 3D Design - Roland MODELA MDX-15 User Manual





For items other than [Tool Down Position] and [Fill] - [Tool Width], suitable values are set for engraving the com-
position you chose in step 1. However, these values are only suggestions. If the results of actual engraving are not
as expected, adjust the values accordingly.

MODELA 3D DESIGN

This lets you choose a basic shape such as a cylinder or sphere, and modify it to create a three-dimensional object.
You can intuitively create solid objects with smooth curves.
Choose the basic shape

Click
The [Primitives] dialog box appears.
50 9 Software Guide
.
Double-click any tool from 1 to 4 to display the lower
level.
Click [Material], then click the composition of the engraving
material (workpiece).
Double-click [Color] to display the lower level.
Click the color to set, then click the tool number.
If you don't wish to engrave lines of that color, click
[None].
Double-click on the tool number to display the lower
level.
Click [Tool Down Position] and enter the cutting in depth.
For [Fill], click [Tool Width], then enter the diameter of the
tool tip.