Operating Determinations; Rigging - SHOWTEC RGB Studio Beam Driver Product Manual

OPERATING DETERMINATIONS

If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash
etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious damage to people and property !

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all other
safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the driver is lowered from the ceiling or high joists, professional trussing systems have to be used.
Use a clamp to mount the driver, with the mounting-bracket, to the trussing system.
The driver must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net
or safety-cable.
When rigging, derigging or servicing the driver, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
L
N
Make sure that the device is always connected
EU Cable
BROWN
BLUE
YELLOW/GREEN
UK Cable
RED YELLOW/COPPER
BLACK
GREEN
properly to the earth!
3
US Cable
SILVER
GREEN
Pin
FASE
NUL
EARTH