Regulations Governing Installation; Statutory Regulations Governing Installation; Additional Documentation To Be Used - Webasto Thermo Top Evo Installation Instructions Manual

Hide thumbs Also See for Thermo Top Evo:
Table of Contents

Advertisement

1

Regulations governing installation

1.1.

Statutory regulations governing installation

Type approvals according to ECE-R 10 (EMC) and ECE-R 122 (Heater) exist for
the Thermo Top Evo heater.
See chapter 14, "Technical Data" for the approval number.
The provisions of these Directives are binding within the
territory governed by EU Directive 70/156/EEC and/or EC/2007/
46 (binding for new vehicle types as of 29/04/2009) and should
also be observed in countries in which there are no special
regulations!
Failure to follow the installation instructions and the notes
contained therein will lead to all liability being refused by
Webasto. The same applies if repairs are carried out incorrectly
or with the use of parts other than genuine spare parts. This will
result in the invalidation of the type approval for the heater and
therefore of its homologation/ECE type approval.
1.2.

Additional documentation to be used

These installation instructions do not contain all necessary information and
instructions with regard to the installation of Thermo Top Evo heaters.
In addition, the operating instructions must also be used.
Technical Information
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents