A1.3.2 Detection Area Of The Transmissive Sensor - Toshiba B-EV4D SERIES Owner's Manual

APPENDIX 1 SPECIFICATIONS
A1.3.1 Media Type (Cont.)
Item
Width including backing paper
Media width
Label
Media pitch
Tag
Media length
Gap/ Black mark length
Black mark width
Thickness
Max. outer roll diameter
Roll direction
Inner core diameter
NOTES:
1. To ensure print quality and print head life use only TOSHIBA TEC approved media.
2. When using a media roll of 76.2-mm (3") inner core diameter, the 3"-Diameter Media Shaft included in the
optional External Media Roll Hanger is required.

A1.3.2 Detection Area of the Transmissive Sensor

The Transmissive sensor is fixed and positioned at 6.35 mm right of the center of the media path.
The Transmissive Sensor detects a gap between labels, as illustrated below.
Sensor position
Min. 2 mm
(Min. 6 mm:
cut mode)
Issue mode
Batch mode
203 dpi
(0.39 to 39.3)
10 to 457.2
300 dpi
(0.39 to 18.0)
203 dpi
(0.39 to 39.3)
10 to 457.2
300 dpi
(0.39 to 18.0)
203 dpi
(0.31 to 39.25)
300 dpi 8 to 455.2 (0.31 to 17.9)
Ø214 (8.42): When the optional External Media Roll Hanger is used.
Area to be detected.
Label
Gap
Label
Min. 8 mm
25.4 to 112 (1.0 to 4.41)
22.4 to 109 (0.88 to 4.29)
10 to 999
10 to 999
8 to 997
2.0 to 10.0 (0.08 to 0.39)
Min. 8.0 (0.31)
0.06 to 0.19 (0.0024 to 0.0075)
Outside (standard), Inside
25.4 to 38.1, or 76.2 (1 to 1.5, or 3)
6.35mm
EA1- 4
ENGLISH VERSION EO1-33088
Strip mode
25.4 to 152.4
(1.0 to 6)
25.4 to 152.4
(1.0 to 6)
-----
-----
23.4 to 150.4
(0.92 to 5.92)
23.4 to 150.4
(0.92 to 5.92)
Ø127 (5)
(See NOTE 2.)
Sensor position
Print side
Media feed direction
A1.3 Media
Unit: mm (inch)
Cut mode
25.4 to 999
(1.0 to 39.3)
25.4 to 457.2
(1.0 to 18.0)
25.4 to 999
(1.0 to 39.3)
25.4 to 457.2
(1.0 to 18.0)
19.4 to 993
(1.0 to 39.1)
19.4 to 451.2
(1.0 to 17.76)
6.0 to 10.0
(0.24 to 0.39)