Eaton Power XL SmartWire-DT DX-NET-SWD Series Manual page 63

PNU PNU Parameter number in
Index Subindex specific device
DA1
452 0 P2-16
452 1 P2-19
453 0 P2-17
1 P2-20
454 0 P6-04
460 0 P2-11
460 1 P2-13
501 0 P0-11
1 P0-20
5 0 2 0 ✓
5 0 3 0 P0-25
1 P0-60
5 0 4 0 ✓
5 0 5 0 P0-14
1 P0-15
5 0 7 0 P0-12
Access right
DC1 DE1 RUN/
STOP
P-19 – RUN
– – RUN
– – RUN
– – RUN
– – RUN
P-25 – RUN
– – RUN
P00-07 P00-07 STOP
P00-08 P00-08 STOP
- P00-06 STOP
- - STOP
- - STOP
✓ P00-05 STOP
– – STOP
– – STOP
– – STOP
DX-NET-SWD... 08/14 MN04012009Z-EN www.eaton.com
Data type Name
ro/rw
rw U16 RO1 upper limit
rw U16 RO2 upper limit
rw U16 RO1 lower limit
rw U16 RO2 lower limit
rw U16 RO1 HysteresisWidth
rw U16 AO1 Function
rw U16 AO2 Function
ro UInt16 Motor voltage
ro UInt16 DC link voltage
ro Output frequency
ro Motor speed
ro n-slip
ro Motor current
ro Calculated excitation
current
ro Calculated I-rotor
ro Motor torque
4 Commissioning
4.5 Acyclic data
Description
Limit value for relay output 1
For more information on the
available settings, please
refer to the manual for the
basic device.
Limit value for relay output 2
For more information on the
available settings, please
refer to the manual for the
basic device.
Lower limit value for relay
output 1
For more information on the
available settings, please
refer to the manual for the
basic device.
Lower limit value for relay
output 2
For more information on the
available settings, please
refer to the manual for the
basic device.
Relay hysteresis band
Used to select the analog
output function
For more information on the
available settings, please
refer to the manual for the
basic device.
Used to select analog output
function 2
For more information on the
available settings, please
refer to the manual for the
basic device
Current output voltage, in
volts
Current DC link voltage, in
volts
Current output frequency, in
Hz
Calculated rotor speed
Calculated slip speed
Current motor current, in
amperes
Magnetizing current (Id)
Rotor current (Iq)
Motor torque
59