Windows 2000/Xp/Server 2003 - Toshiba e-STUDIO 281C Printing Manual

8.
NOTE: Before using the printer driver for printing, please configure the installed options of the
equipment and department code (if required) on the printer driver.

— Windows 2000/XP/Server 2003

Configuring the Raw TCP/LPR port for Windows 2000/XP/Server 2003
The following describes an installation on Windows 2000. The procedure is the same
when Windows XP or Windows Server 2003 is used.
NOTE: You must log into Windows as a user who has the "Administrators" or "Power Users"
privilege when using Windows 2000, Windows XP, or Windows Server 2003.
1.
Printing Guide — Installing Client Software for Windows
Make sure the created LPR port is checked in the "Print to
the following port" list and click [OK] to save settings.
P.194 "Before Using the Printer Driver"
Install the client software using the installer in the Client Util-
ities CD-ROM.
• Please install the client software following the instruction of the installation
for parallel printing.
P.27 "Installation for Parallel Printing Using the Installer"
2. Installing Client Software
67