Toshiba e-STUDIO 281C Printing Manual page 230

3. Printing
Add/Edit Watermark
When you click [Add] or [Edit], the Watermark dialog box appears and you can create
new watermark or edit selected watermarks.
1
2
3
4
1) X Position
2) Y Position
3) Units
4) [Center Watermark]
5) Caption
6) Font Name
NOTE: Do not select the symbol font such as "Symbol", "Webdings", and so on. The symbol
font will not apply to the watermark text.
7) Style
8) Color
NOTES: •
•
230
The horizontal position of a watermark is displayed. You can change the position
using the vertical scroll bar.
The vertical position of a watermark is displayed. You can change the position
using the horizontal scroll bar.
Select the unit for the "X Position" and "Y Position" field.
Click this to automatically move the watermark position to the center.
Enter the text of a watermark. You can enter up to 63 alphanumeric characters.
When you are editing a watermark, the selected watermark text is displayed in the
field.
Select a font to be used for the watermark text.
Select the font style for the watermark text.
- Regular — Select this to set the regular style to the text.
- Bold — Select this to set the bold style to the text.
- Italic — Select this to set the italic style to the text.
- Bold Italic — Select this to set the bold and italic style to the text.
Select a color of watermark text. If the color that you require is not listed in the drop
down box, click [Browse] to add new color.
When "Mono" is selected at the "Color" drop down box on the Setup Tab, this option
will be disabled.
This option is disabled for the PCL6 printer driver because it supports only black and
white printing.
5
6
7
8
9
10
11
12
13
Printing Guide — Printing from Windows